Pump for waste solvents / slightly viscous media / self-priming / EX
Pump for waste solvents in cement plant A major cement manufacturer uses high-energy fuels in its kilns. The fuels are delivered by tanker truck. To transfer the fuels, the cement manufacturer required a pump with EX Zone 1, T3 certification. The pump had to be insensitive to solids, able to pump slightly viscous media, self-priming and resistant to solvents. One further prerequisite for this application was a compact, space-saving design of the pump and the drive.
As a solution the manufacturer selected a Accuvon AP 100 Rotary Lobe Pump with bevel gear reducer and motor. Working closely with the customer, the pump was designed to meet the tough requirements established by the cement manufacturer.
Application data:
| Pump | AP 100 |
| Medium | Waste solvents |
| Flow Rate | 132 gpm (30 m³/h) |
| Pump Speed | 150 - 250 rpm |
| Solids | up to .08“ (2.0 mm) max. |
| Environment | EX Zone 1, T3 |
| pH value | Neutral |
| Temperature | approx. 68° F (20° C) |
| Pressure | up to 44 psi (3 bar) |
| Viscosity | 1 to 500 mPas |
Technical data::
| Casing | cast iron |
| Casing protection plate | 1.8714 |
| Static O-rings | FPM |
| Shaft seal | SISIC |
| O-Rings (dynamic) | FEPM |
| Rotors | 3-lobe linear, PTFE |
| Drive | Bevel gear motor 5 hp (3 kW) |
Advantages of this Accuvon AP 100
· EX (explosion proof) II 2G cb IIB 135°C
· Self priming
· Compact design
· Insensitive to solids
· Solvent resistant seals
· Solvent resistant PTFE rotary lobes
Similar application of sewage treatment:
Accuvon provides many applications on-board ships and in other areas of the marine industries - from handling of both fresh and seawaters to fuels of all kinds, oil or oil sludge, bilge or other water-oil mixtures, fish or fish waste, sewage or other fluids with or without solids, of low or high viscosities.
Sewage | Ballast Water | Bilge / Loading | Oil Sludge | Fuel / Crude Oil | Oil-Water Separation | Fish / Kitchen Waste | Mud | Emulsions | Oilfield Chemicals | Marine Diesel Oil | as Skimmer Pump
Features of Accuvon Rotary Lobe Pumps:
1.Self-priming, Valve-less, Positive Displacement Pump
2. Easy Maintenance through Front Cover
3. Controllable Flow, Ratio up to 1 : 5
4. Capacity of up to 3200 m³/h
5.Pressures of up to 25 bar
6. Dry-running Capability
7.Reversibility, same pump output for both directions
8. Gentle, Low-Pulsation Pumping
9.For Viscous, Solid, Abrasive or Shea-sensitive Mediums
10. Low Parts Replacement Costs
Components of a Accuvon Rotary Lobe Pump
1 Timing gear
2 Quench and control chamber
3 Casing in block design
4 Unwetted shaft
5 Axial and radial casing protection
6 Shaft seal
7 Rotors
8 Quick-release cover
Product Tags:
|
|
API Waste Solvent Chemical Lobe Pump Self Priming Wear Resistant Images
|
